Plasma Power Sources

Approx. Rs 1,00,000 / UnitGet Latest Price

• Highest cutting & marking quality
• High cutting speed
• Wide cutting range
• Low costs per cutting metre
• Long lifetime of the consumables
• Low gas consumption

Approx. Rs 12,00,000 / UnitGet Latest Price

• HyPerformance plasma cuts fine-feature parts with superior quality and consistency.
• HyDefinition technology aligns and focuses the plasma arc for more powerful precision cutting up to 80 mm (3.2").
• New HDi technology delivers HyDefinition cut quality on thin stainless steel, with extremely sharp top edge quality, shiny surface finish, and superior angularity with reduced angle variation.
• Patented True Hole technology (auto gas systems only) produces hole quality that is significantly better than anything previously achievable with plasma.

• LongLife technology significantly increases consumable life and enables consistent HyDefinition cut quality
• Faster cut speeds let you produce more parts per hour; higher quality cutting virtually eliminates the cost of secondary operations
• Patented PowerPierce technology lets you pierce thicker than ever before and replace slower-cutting oxyfuel technology

• Cuts, bevels, and marks carbon steel, stainless steel, aluminum, and other metals with HyDefinition precision
• Modular system design allows easy power supply upgrades to increase system capabilities when requirements change

• Robust, simple system architecture with 50% fewer parts than most competitive systems
• Best-in-class manufacturing and extensive testing ensure that every Hypertherm system meets the highest quality standards.

• ISO 9013 is a standard that defines cut quality of thermally cut parts. The lower the range (range 1 is the lowest), the smaller the angle on the cut face. Cut angle in range 4 is better than in range 5.
• Maximum pierce requires usee of an autogas console and controlled motion process.

Approx. Rs 3,00,000 / PieceGet Latest Price

• Highest cutting quality
• High cutting speed
• High perpendicularity tolerance
• User-friendly & easy to service
• Low costs per cutting metre

• Simply good cutting: With just a few settings the compact plasma cutting units of the Smart Focus series achieve excellent results in the cutting range from 1 to 100 mm – even under most challenging conditions. The Smart Focus units can also be used for marking, bevel and underwater cutting – made in Germany.
• Mild steel cutting with Contour Cut & Silent Cut: With the well-proven Contour Cut technology small contours, narrow webs and holes with a diameter to material thickness ratio of 1:1 can be cut in excellent quality in mild steel. Contour Cut Speed allows the cutting of contours with a speed that is up to 50 % faster. As a further development of Contour Cut the new Silent Cut technology reduces the sound pressure level by up to 15 dB(A) during cutting. This is made possible by new consumables and the use of the Silent Cut cutting database-with similar cut quality.
• Torches & gas control-intelligent redevelopment (Modern Components): Either manual or automated gas supply units are available for the Smart Focus series. With these the user achieves best cutting results with highest, reproducible quality. The manual gas supply unit PGE-300 now allows for plasma cutting with air as plasma gas. The new torches PerCut 2000 and PerCut 4000 have been improved compared to the preceding models. They provide precise cuts and highest cutting speeds. Their unique cooling system up to the torch tip guarantees longest consumable life and reduces the gas consumption and costs per cutting metre.

Approx. Rs 1,50,000 / UnitGet Latest Price

• The STARCUT-105MAX plasma system provides the superior cutting capacity for reliable, long consumable life and low cost operation characteristics across a wide range of industrial application.
• The cutting capacity can reach 16mm (dross free) for Air/Air gas with CNC cutting, maximum productivity.

• Maximum productivity: The cutting speed of dross free can reach 900mm/min for 16mm mild steel.
• Higher reliability and stability: Designed with 100% duty cycle for the most demanding production environments. Designed and tested as the STARCUT series product for superior reliability in the most demanding cutting environments.
• Long life consumables: Reduce costs with long consumables life and more up time.
• Economic: Low maintenance for maximum uptime.

• 12mm mild steel
• 105A Air/Air
• 20s duration
• The number of consumable starts can reach more than 500 times (ISO9013 Range 2)

• STAR ENGINEERS STARCUT-105MAX series integrated plasma solutions deliver the industry’s best precision cutting on carbon steel, low alloy steels and so on.
• Easy to install, easy to operate, easy to maximize performance.
• User-friendly control system, simple and intuitive operation interface.
• Digital control, and advanced diagnostics simplify troubleshooting and service.

Approx. Rs 2,00,000 / UnitGet Latest Price

• The STARCUT-125MAX has the same features as the STARCUT-105MAX. but with more power from an output current of 125Amps, Designed to maximize uptime and productivity for Air plasma cutting.
• The cutting capacity can reach 18mm (dross free) forAir/Air gas with CNC cutting, maximum productivity.

• Maximum productivity: The system offers a 100% duty cycle, can be quickly cut less than 20mm mild steel,and 25mm(1’’) CNC pierce capability, and fast gouging metal removal.
• Long life consumables: Reduce costs with long consumables life and more up time.
• More reliability and stability: Designed with 100% duty cycle for the most demanding production environments. Designed and tested as the TOPWELL PROCUT series product for superior reliability in the most demanding cutting environments.
• Economic: Low maintenance for maximum uptime.

• 12mm mild steel
• 125A Air/Air
• 20s duration
• The number of consumable starts can reach more than 500 times (ISO9013 Range 2).

• STAR ENGINEERS STARCUT-125MAX series integrated plasma solutions deliver the industry’s best precision cutting on carbon steel, low alloy steels and so on.
• Easy to install, easy to operate, easy to maximize performance.
• User-friendly control system, simple and intuitive operation interface.
• Digital control, and advanced diagnostics simplify troubleshooting and service.

Approx. Rs 1,00,000 / UnitGet Latest Price

• With more power from an output current of 75Amps, this premier system is for 25mm(1') handheld cutting.
• Designed as a portable machine, the operator can easily select exactly the right tool for job.
• Hand cutting, gouging, portable automation, X-Y table, and so on.

• Light weight, compact design and convenient mounting feet allow for easy mounting in any application.
• Finish jobs faster with cut speeds two and three times greater than other traditional cutting process.
• Speed less time on secondary operations due to superior cut and gouge capacity.
• A powerful 60% duty cycle to handle long time production cutting in the toughest environments.
• The torch is versatile and durable enough to handle a variety of jobs.
• Topwell’s long-life consumable deliver operating cost that is less than half the competition.

Approx. Rs 55,000 / PieceGet Latest Price

Features:

• Smooth arc striking with HF control
• Quality narrow cutting and excellent travel speed
• Cutting accessories with competitive price and performance
• Recommended thickness: 30mm (carbon steel)
• Energy saving

• Cutting torch
• Earth clamp with cable
• Air filter
• Hose
• Hose clamp

Additional Information:

• Delivery Time: 10 DAYS

Approx. Rs 1,50,000 / UnitGet Latest Price

• Drag cutting: For dragging the torch directly across the work piece.
• Extended reach cutting: For improved visibility & accessibility when cutting in confined spaces.
• Extended reach gouging: For improved visibility & accessibility when gouging in confined spaces.
• Fine feature cutting: For narrow kerf width with minimal dross and heat affected zone.
• Flush cutting: For cutting closer to base materials using a 45 degree.
• Max control gouging: For precise metal removal, shallower gouge profiles and light metal washing.
• Max removal gouging: For aggressive metal removal, deep gouge profiles and extreme metal washing.
• Mechanized cutting: For portable automation and table cutting.

• Finish jobs faster with cut speeds one and a half times greater than oxyfuel on 12 mm (1/2”) mild steel.
• Superior cut and gouge quality let you spend less time on grinding and edge preparation.
• Multiple, easy-to-use torch styles let you tackle a wide variety of jobs using the same system.

• No need to change the air pressure – Smart Sense technology ensures that it is always correctly set.
• SpringStart technology ensures consistent starting and a more reliable torch.
• Drag cut at full output with a patented shield that reduces dross buildup for smoother cutting.

• Hypertherm Certified reliability ensures peak performance even in the harshest environments.
• Duramax torches are designed for high-impact and heat resistance.

Approx. Rs 15,00,000 / UnitGet Latest Price

• Fastest cut speeds in its class produce more finished parts per hour
• Engineered with 100% duty cycle for the most demanding production environments.
• Automatic settings, tool free leads and optional quick disconnect torches let you quickly transition between cutting, gouging, mechanized and handheld processes
• Superior cut quality and consistency minimize the need for costly secondary operations

• Optimized cutting parameters are automatically set and controlled in one step to deliver consistent results without operator intervention
• Advanced diagnostics simplify troubleshooting and service
• Optional serial communications allow full control of the system from the CNC

• Patented consumable designs enable best in class cut speeds and robust production piercing using lower amperage levels
• Advanced consumable technologies including LongLife, CoolFlow™ and TrueFlow™ significantly increase consumable life to reduce cost per part

• Robust, simple system architecture with 50% fewer parts than most competitive systems
• Best-in-class manufacturing and extensive testing ensure that every Hypertherm system meets the highest quality standards

• 200 A handheld torch capable of cutting up to 75 mm (3”) for demolition, scrapping and other heavy-duty cutting demands.
• Drag-cutting consumables make it easy to follow a line or template.
• Metal removal rate on mild steel up to 18.7 kg/hr (41.2 lbs/hr).
• Plasma gouging can replace grinding or carbon arc gouging for many metal-removal applications. Plasma gouging produces less noise and fumes than carbon arc gouging and avoids risks of metallurgic problems from carbon contamination.

• Hypertherm is ISO 9001: 2000 registered.
• Hypertherm’s full-system warranty provides complete coverage for one year on the torch and leads and two years on all other system components.
• Hypertherm’s plasma power supplies are engineered to deliver industry leading energy efficiency and productivity with power efficiency ratings of 90% or greater and power factors up to 0.98. Extreme energy efficiency, long consumable life, and lean manufacturing lead to the use of fewer natural resources and a reduced environmental impact.